NetVault Flat Panel Conversion Kit - Mount Installation
Magnetic Mount Kit
Your Magnetic
Mount Set contains:
- 4 Rubber coated magnet discs, each with M6 female threading
- 4 M6 x 40mm Button Socket Screws
- 12 M6 Black Nylon Washers
To complete the
installation, you will require a HEX 4 driver bit or key.
Step-by-Step Installation Process:
- Start by removing the existing screws located at each corner of the flat panel kit.
- Replace these with the supplied M6 x 40mm Button Socket Screws, securely fastening them into the corners of the kit.
- On the underside of the flat panel kit, position 3 M6 Black Nylon Washers onto each screw.
- Next, attach the rubber coated magnet discs to each
screw on the underside of the kit by screwing them onto the protruding
ends of the screws.
Ensure that each magnet disc is securely fastened and
check for a flat surface on the disc.
The M6 threading is uncapped and
could potentially allow the screw to protrude through the other side if
over-tightened, so please ensure that this does not occur.
By adhering to these instructions, you should have a successful and secure installation. If you encounter any difficulties or have further queries, please don't hesitate to contact NetVault support for assistance.
Suction Cup Mount Kit
Your Suction Cup Mount Set includes:
- 4 114mm Suction Cups, each with a 1/4" female threading
- 4 1/4" x 1-1/2" Screws
To complete the
installation, you will need a HEX 4 driver bit or key.
Step-by-Step
Installation Process:
- Start by removing the existing screws located at each corner of the flat panel kit.
- Replace these with the supplied 1/4" x 1-1/2" screws, securely fastening them into the corners of the kit.
- Next, attach the 114mm Suction Cups to each screw on the underside of the kit by screwing them onto the protruding ends of the screws. Ensure that each suction cup is securely fastened.
By adhering to these instructions, you should have a successful and secure installation. If you encounter any difficulties or have further queries, please don't hesitate to contact NetVault support for assistance.
Related Articles
NetVault Mobile Service - Troubleshooting
This Document will specify the information we need from you so we can begin investigations, and if necessary, raise the issue with our carriers/suppliers. Basic Troubleshooting Steps (Mandatory) To get started, we require the completion of the first ...Setup Email Account in MS Outlook
Below are the steps on how to setup your NetVault Hosted Exchange email account in MS Outlook: 1. Open the Windows Start Menu. 2. Type “Control Panel” and click on the Control Panel entry. 3. If you do not see a lot of icons like the below ...Vodia PBX Documentation
Resources The Vodia PBX has grown for more than ten years into a complex tool that offers a lot of features, but also requires the know-how on how to run it. On this documentation portal you can find information on how to configure and operate the ...How to change 3CX extension status
How to change 3CX extension status to “Do not Disturb” Login to 3CX Webclient using the extension number and extension password. (URL - https://netvault.3cx.com.au:5001/webclient) Change the username as per your 3CX URL. 2. Click on top left to ...How to set Voicemail of 3CX Extension via Web Client / Desktop App
Open the 3CX Web Client or Desktop App. Login to 3CX Webclient using the extension number and extension password. (For example- https://netvault.3cx.com.au:5001/webclient ) Modify the 3CX URL according to your account details. If you're unsure about ...